DIN Cast Steel Flanged Ends RF/RTJ Swing Type Check Valve, WCB/CF8/CF8M, PN10~PN64

Instructions:

●Check valves are flow sensitive and rely on the line fluid to open and close. The internal disc allows flow to pass forward, which opens the valve. The disc begins closing the valve as forward flow decreases or is reversed, depending on the design. The function or purpose of a check valve is to prevent reverse flow. Construction is normally simple with only a few components such as the body, seat, disc, and cover. Depending on design, there may be other items such as a stem, hinge pin, disc arm, spring, ball, elastomers, and bearings.

●Swing checks are a simple design using a disc attached to an arm that is hinged at the top of the valve (at the 12 o’clock position). Reverse flow and gravity assist the valve in closing. Swing checks can be used for most media and generally provide good flow capacity. They range in size from 1/2 inch and smaller to 50 inches and larger, and are available with threaded, socket weld, flanged, or butt weld end connections. Swing checks are typically easy to inspect and maintain. In most cases, repairs can be performed with the valve in the line. Because of their design, swing checks are not fast-closing valves due to the travel distance from full open to close.

●Piston, or lift, check valves are available as inclined (Y pattern) or conventional (90 degree) body designs. In either case, a body-guided disc moves within the body bore. The body guide ensures alignment of the seat and disc when the valve closes. Piston check valves are available from 1/4 inch to 24 inches and larger. Smaller valves, 1/4 inch to 2 inches, are normally provided with a spring to assist in closing and to ensure the disc slides back to the seat when installed in vertical lines. The body design selected will determine the pressure drop; inclined designs will provide the best flow performance. Piston check valves are available with threaded or socket weld ends for 2 inches and smaller. Larger valves are available with flanged or butt weld ends. Special end connections are available, but you should consult the valve manufacturer. Piston check valves can normally be inspected and repaired in line. Exercise caution when these valves are used for dirty media because that media could cause the disc to stick inside the body bore.

Specifications:

Product Name	Cast Steel Swing Type Flange ends Check Valve DIN Standard PN16~PN64
1. Material	SS304/316/304L/316L ( CF8/CF8M/CF3/CF3M), WCB, WCC, LCB,LCC,WC6,WC9, C5,C12, etc
2. Size	2’'~24'' ( DN50~DN600)
3. Thread standard	ISO9001 & CE, TS
4. Type	Swing Type/Lift Type
5. Working Pressure	PN10/PN16/PN40/PN64
6. Connection Ends	RF, RTJ, FF, Butt Welding
7. Working Temp.	-29~425℃, or according to customer requirements for different industry.
8. Suitable Medium	Water, Natural Gas, Oil and some corrosive liquid
9. Inspection & Testing	According to API598
Shipment
Delivery Time	15~20 Days
Package	Standard Exporting Plywood Case
Shipping Port	Ningbo/Shanghai, China
Shipping Terms	Exw, FOB, CFR, CIF, etc.
Payment Terms	T/T, Western Union, PayPal, etc.
	30% prepayment, 70% balance paid before shipping or against copy of BL
Country of Origin	Wenzhou city, China
Production Capacity	6000 ton/year
MOQ	10 PCS/size

Construction:

1.BODY. The body is cast carbon steel unless otherwise specified. Top entry allows easy inspection and maintenance. Bosses are provided for drain taps or bypass as specified.

2.COVER. The cover, complete with integral lifting holes, is made from plate unless otherwise specified. A plugged ½”NPT port is provided.

3.SHAFT PLUG. The shaft plug covers the shaft opening. It is made from carbon steel unless otherwise specified.

4.COVER PLATE STUD. Used to attach cover plate to body. Material is as specified.

5.COVER NUT. Used to attach cover plate to body. Material is as specified.

6.PIPE PLUG. Used to plug off cover port.

7.COVER SEAL. The cover seal provides the seal between the body and cover. Material is as specified.

8.CLAPPER SEAL. The clapper seal provides the seal between the body and clapper. Material is as specified.

9.SEAT SEAL (Optional). Used when removable seat is required. Material is as specified.

10.ARM. The arm is cast carbon steel unless otherwise specified. It holds and guides the clapper.

11.SHAFT. The shaft is made from 300 series stainless steel unless otherwise specified. It supports the arm.

12.CLAPPER. The clapper is cast carbon steel unless otherwise specified. It holds the clapper seal. The arm attaches to the back of the clapper using an integral threaded stud with a nut and retainer pin.

13.CLAPPER RETAINER NUT. The clapper retainer nut holds the clapper on the arm.

14.CLAPPER RETAINER PIN. This pin keeps the clapper retainer nut from inadvertently coming loose. It is made from 300 series stainless steel unless otherwise specified.

15.BUSHING. The bushing isolates the arm from the body allowing free movement.

16.REMOVABLE SEAT (Optional). Allows seat to be replaced if seal area becomes damaged Carbon steel unless otherwise specified

Applicable Standards:

1.Design & manufacture DIN 3356

2.Face to face DIN3202

3.End flanges DIN2543-2545

4.Butt weld ends EN12627

5.Inspection and test  ISO 5208、EN12266

Competitive Advantages:

1.Our products is guaranteed within 18 months after delivery.

2.We offer free sample if interest before orders.

3.Technology renovation, process improvement, structure optimization and quality improvement.

4.Excellent after-sales service system, providing timely and optimal service, which help you to win the market.

5.Convenient shipping sea port, and standard exporting carton boxes & plywood cases.

6.100% inspection & testing before delivery.

7.Third party inspection on customer requirement.

DIN Swing Type Check Valve
     

DIN Lift Type Check Valve

    

Note: All the data should be confirmed with the approved drawings of manufacturer.

RST VALVE is looking forward to strengthening cooperation with various sectors of society to create brilliancy together.
MADE IN CHINA, FOCUS ON WORLD!